U-POL High #5 Dark Grey Primer Filler, Aerosol 765

U-POL High #5 Dark Grey Primer Filler, Aerosol

High #5 Primer Filler is a 1K ready to use high build primer filler in an aerosol. It is used for priming uneven surfaces before top coating. High #5 is capable of producing a coating of a film thickness similar to that of a spray gun applied primer. The convenience of using a high build primer filler in an aerosol means that masking is kept to a minimum. Mixing paint and cleaning spray equipment are avoided as a result of using High #5 primer filler leading to savings in time and materials. High #5 primer filler is chromate free and easy to sand. 

HIGH #5 Primer Filler can be applied to the following surfaces:

• Fully cured paint.
• Polyester body filler and G.R.P.
• Properly prepared steel panels.

Directions for using High #5 Primer Filler Aerosol

1. Thoroughly clean and degrease surfaces with a good quality grease and wax remover.
2. Sand wet or dry with 280-320 abrasive, re-clean, dry and degrease.
3. Apply 1-2 light even coats allowing 5-10 minutes flash time between coats.
4. Allow final coat to cure before sanding out imperfections with 600-800 grit sand paper.
5. High #5 Primer Filler is compatible with most all paint systems.