VHT SP206, Blue Wrinkle Paint

VHT SP206, Blue Wrinkle Paint

The VHT SP206, Blue Wrinkle Paint is designed to give you a rich color and wrinkle texture for a non slip surface or customized look and feel. 

VHT SP206, Blue Wrinkle Paint Application Steps:

1. Prepare the surface by using Dupli-Color Prep Spray, Grease & Wax Remover to remove possible contaminants.
2. Sand the surface using 320 sand paper or a maroon scuff sanding pad.
3. Mask off surrounding areas to protect from overspray then reclean the surface with Dupli-Color Prep Spray.
4. Shake Blue Wrinkle Paint vigorously for 1 minute.
5. Apply 3 wet coats allowing 5 minutes dry time between each to prevent sagging. Spray 1st coat horizontally, 2nd coat vertically, and the 3rd coat diagonolly to ensure the whole surface is evenly coated.
6. Allow 24 hours prior to light handling and 48 hours for before installing parts.

Salesman Note: Blue Wrinkle Paint dries very slowly and will not wrinkle immediately after spraying. Allow 2 hours to air dry then inspect. If the finish does not wrinkle uniformly you can re-coat with 2 wet coats.