3D 505, AAT 505 Corrective Glaze

3D 505, AAT 505 Corrective Glaze

The 3D 505, AAT 505 Corrective Glaze is formulated with Adaptive Abrasive Technology and Montan Wax that is designed to blend older panels to match newly painted panels while removing swirls and light to moderate scratches and giving a Montan UV Protection to allow continued curing. AAT 505 Corrective Glaze can be used on fresh and cured paints and can also be used on clear or gel coat surfaces, creating a deep, wet gloss finish.

How to Apply 3D 505, AAT 505 Corrective Glaze:

When Applying 3D 505, AAT 505 Corrective Glaze use a 3D Spider Cut Finishing Pad on a buffer and set the speed to 600-1200 rpms. Apply 4 to 6 pea size drops of Corrective Glaze on the pad to work in a 2ft x 2ft area. With slow back and forth, overlapping motions, keep the pads surface flat to correct swirl marks and light to moderate scratches while blending panels and applying protection. Remove with a clean microfiber cloth to reveal true paint correction and high gloss.