3D 422, 3D Poxy

3D 422, 3D Poxy

• Color: Yellow
• Scent: Baby Powder
• Does not leave behind white residue on textured plastics

The 3D 422, 3D Poxy is a long lasting sealant wax, formulated with montan wax that is designed to bond to paint, glass, plastic, and metal for a long lasting shine and protection. 3D Poxy will give a deep, glossy finish while protecting against bird droppings, hard water, acid rain, and other paint contaminations. 3D Poxy is designed to work extremely well on all colors including dark paint colors. The Montan Wax in the 3D 422, 3D Poxy has a higher melting point than any other wax on the market. It's melting point is 203 degrees Fahrenheit whereas Carnauba Wax melts at 187 degrees Fahrenheit which will give you a much better durability.

How to Apply 3D 422, 3D Poxy by Hand:

When applying the 3D 422, 3D Poxy, shake well and apply 6-8 pea size drops on an wax applicator pad. Apply in 2ft by 2ft sections until the whole vehicle is covered, then wipe over the whole car with the same applicator pad. Allow the product to cure for at least 15 minutes, longer is better. Remove 3D Poxy with a clean, dry microfiber towel and buff to a high gloss finish. 

How to Apply 3D 422, 3D Poxy by Machine:

When applying the 3D 422, 3D Poxy with a DA polisher, apply 6-8 pea size drops on a Black Spider foam pad on the polisher. Set the speed on the polisher at 1 or 2, then in a snake pattern cover every inch of the vehicle. After applying 3D Poxy to the whole vehicle, allow the product to cure for at least 15 minutes, longer is better. Remove 3D Poxy with a clean, dry microfiber towel and buff to a high gloss finish.

Note: Depending on maintenance and weather, reapply every 3-4 months.