3D 936, Ceramic Touch

3D 936, Ceramic Touch 

The 3D 936, Ceramic Touch is a spray and wipe ceramic coating that is formulated with a Sio2 hydrophobic formula that is designed to leave behind a hard ceramic top coat and a super shine. The hydrophobic formula in Ceramic Touch is designed to repel water, road film, and other contaminants from painted surfaces for long lasting protection!

Salesman Notes: 3D 936, Ceramic Touch can be used for more than just automotive use. Ceramic Touch can also be used in your home on shower doors, stainless sinks, faucets, ceramic tile, and shower heads, to eliminate hard water spotting, calcium deposits, soap scum, etc.

Prior to Application of 3D 936, Ceramic Touch:

For newer vehicles with no paint surface defects, wash the vehicle with a good quality car wash soap such as 3D 2021, Super Soap or equivalent. Allow to dry thouroughly and then wipe the surface liberally with denatured or isopropyl alcohol using a microfiber towel and drying with a second microfiber towel.

For vehicles with paint surface defects, use a compound such as 3D 400, 3D One, detailing clay, or other paint correction tools. Once completed, wipe the surface liberally with denatured or isopropyl alcohol using a microfiber towel and drying with a second microfiber towel.

How to Apply 3D 936, Ceramic Touch:

When applying 3D 936, Ceramic Touch make sure surface is prepped and free of oils and residue before spraying. Spray enough Ceramic Touch to cover the surface with a fine mist. Working in 2ft x 2ft sections using a side to side motion, spread the coating evenly with a microfiber towel. Wait 30 seconds and then buff the Ceramic Touch off with a clean microfiber towel. If the surface feels oily, wait a few more seconds but no longer than minute and buff again. To ensure proper curing, do not wash the surface for 72 hours after finishing the applicationand for best results, wait up to 5 days.