GM WA9539, Medium Green Metallic

It seems the spray cans used are substandard I ordered the first as a set, paint and clear coat. The paint spray was splatters and dripped on the panel I was painting I had to keep wiping the nozzle and still got drips so I ordered a second can thinking it was just a bad can and sanded the panel down and tried the second one and same thing splatters and inconsistent spray pattern. Then the clear coat can has the activator on the bottom and I put the red cap thing on it pushed down and it sprayed all over my hands and I hope some went into the can to activate the clear coat and it’s spray pattern was better but still not great. Paint match was perfect though

So I ordered a second can of paint thinking that it was just a bad spray can and sanded out all the splatters from the previous can and same thing, drips from the tip and when there’s about 1/3 paint left in the can it starts to get spotty on the spray pattern. Probably won’t do this again.

I shook the can for 2 minutes like was recommended and started to spray and in the first pass it dripped on the middle of the panel so I had to keep wiping the top of the spray can and still got 2 more drips and splatters in the paint which is frustrating. Then when the can was about 1/3 left it started to spray poorly mostly air with spots of paint like this, air air paint air air air paint paint air. That made it really difficult so I ordered another can of paint and will sand this down again and see how the next one goes when it gets here.