Frequently bought together:
Description
SEM 39063, Gloss Trim Black, Trim Paint
- 12 Oz Aerosol
- Satin Gloss Level
- Matches factory finish on many automotive exterior trim components.
- No primer needed for adhesion.
SEM Trim Paint Surface Preparation:
Wash the part thoroughly with 39362 SEM Soap. Clean with good quality Grease and Wax remover such as SEM PN# 38373. Sand with 400 grit sandpaper and reclean with G&W remover. Mask off all areas not to be coated to protect from overspray. Apply light mist coats evenly allowing 5-10 minutes between coats. Several thin coats are better than 1 heavy coat.
Salesman Note: Don't rush to install the part. Trim Paint adhesion improves with time. Full hardness and maximum adhesion should be obtained in about 48 hours.
Related Products
SEM 49153, Trim Black Ultra Gloss
SEM Products
$14.53
SEM 49153, Trim Black Ultra Gloss 20 oz Aerosol Can Gloss
SEM 49153
SEM 39033, Charcoal Metallic, Trim Paint
SEM Products
$16.46
SEM 39033, Charcoal Metallic, Trim Paint
This item has been discontinued by the manufacturer o
SEM 39033
SEM 39143, Original Trim Black
SEM Products
$15.02
SEM 39143, Original Trim Black Paint
15 Oz Aerosol
Satin Gloss Level
SEM 39143
SEM 39141, Original Trim Black, Gallon
SEM Products
$158.50
SEM 39141, Original Trim Black,Gallon Gallon Can Satin Gloss Level Matches factory finish on many automotive exterior trim components. No primer needed for adhesion. SEM Trim Paint Surface...
SEM 39141