SprayMax 3680061, 2K Urethane Glamour Clear Coat

(61 reviews) Write a Review
SMT 3680061
Frequently bought together:


SprayMax, 2 Part (2K) Urethane Aerosol Clear Coat

  • Product expires approximately 36 months after the manufacturer date on the can
  • Once activated, the potlife is approximately 48 hours

SprayMax now offers a 2 part (2K) Urethane Aerosol Clear Coat. This SprayMax 2k Clear Coat spray has a much higher U.V. and weather resistance than any standard aerosol clearcoat on the market today. Contrary to standard aerosol paint technology, Spray Max uses an innovative nozzle technology in combination with a new propellant technology. Spray Max offers a higher yield, a faster spray time, and a wider more even spray pattern than your standard conventional aerosol spraycan.

SprayMax 3680061, 2K Clear Coat Spray Can Benefits:

    • Professional paint results like a spray-gun 
    • No paint mixing
    • No cleaning of the spray-gun
    • No solvent for cleaning
    • No compressor
    • Less overspray

Salesman Notes: The SprayMax 2k Glamour Clear Coat Can works much like a conventional spraygun. It has high transfer efficiency, and great atomization. In my opinion, the SprayMax 2K Urethane Clear Coat is the best clear coat in a spray paint can.

How to Use: First shake for 2 minutes vigorously before activating. 

To activate: Simple take the red button from the cap and attach it to the pin on the bottom of the can. Put the top of the can on stable ground and push the red button firmly and press the pin into the can. Shake again for two minutes to ensure activator is thoroughly mix with clearcoat. After activated, this product will last approximately 24 hours. 

Product Characteristics: SprayMax 2 part Aerosol Clear Coat has excellent adhesion to basecoat and cured lacquer and enamel finishes.

Preparation: Allow basecoat paints at least 30 minutes dry time prior to using the 2K Spray Max Urethane Aerosol Clear Coat. Apply 2-3 coats of aerosol clearcoat. 

How long does 2k clear coat take to dry based on 70° F?

2K Urethane Glamour Clear Coat spray paint needs a minimum of 5-10 minutes of dry time between coats and will be dry to touch in about 1-1/2 hours. After allowing approximately 24 hours dry time, automotive urethane clear coat may been polished by hand or machine.

Now offering 2 other gloss levels of SprayMax ClearCoat, 2K Semi-Matte Clearcoat and 2K Matte Clearcoat.


 Technical Data Sheet.pdf

Safety Data Sheet.pdf

View AllClose

Additional Information

12oz Aerosol
View AllClose

61 Reviews

  • 5
    Using the Spray Max 2K Clear Galmour

    This is the only 2-stage clear spray I use. It flows well without any splatter, (unlike Spray Max’s 1K color sprays which give me nothing but problems with clogging tips and splatter). Remember to apply several light coats of the clear rather than a thick coat. It takes about an hour for the clear to level-off, so if you apply it thick, you will end up with runs. After about 12 hours you are ready to color sand and polish to a mirror finish.

  • 5
    Spray Max 2K clearcoat

    Worked fantastic Sprays like a professional spray gun

  • 5
    This product is amazing. Never used it before and just finished repainting my Harley and it shines like a new bike

    Excellent smoothness and shine

  • 5
    Front Bumper 2011 Nissan Altima

    Used the R&S factory color spray paint and followed up with this 2K clear coat. It was between this and Eastwood brand and this was a little cheaper. I was not disappointed. This stuff did the job perfect on my car. I would defiantly buy this stuff again.

  • 4

    Great spray

  • 5
    Touch up paints and clear coat

    Excellent products and impressive packaging. With great pricing.

  • 5
    Clear Coat looks great

    After the first two paints, I finished off with the clear coat, and it made the paint look great!

  • 5

    Always great service from these guys

  • 5
    Excellent product lays down smooth

    Will buy again

  • 4
    Clear Glamour

    Would be five stars, ordered a four pack, but one of the spray tips malfunctioned. This caused drips/splattering, though easily corrected with some sanding after curing. Have already, and will be ordering more.

View AllClose